Switch-Brake Fluid Level: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding, (Refer to BRAKES - WARNING) (Refer to BRAKES - CAUTION) .

Fig 1: Brake Fluid Level Switch

Courtesy of DAIMLERCHRYSLER CORP.

Remove the vehicle wiring harness connector (2) from the brake fluid level switch in the master cylinder brake fluid reservoir (1).

Fig 2: Fluid Level Switch Retaining Tabs - Continental Teves
Courtesy of DAIMLERCHRYSLER CORP.

1 - RESERVOIR

2 - FLUID LEVEL SWITCH RETAINING TABS
Push together the retaining tabs (2) holding the brake fluid level switch in place in the brake fluid reservoir (1).
Pull the brake fluid level switch out the left side of the reservoir.