Switch-Brake Fluid Level: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fluid Level Switch Retaining Tabs - Continental Teves

Courtesy of DAIMLERCHRYSLER CORP.

1 - RESERVOIR

2 - FLUID LEVEL SWITCH RETAINING TABS

Align the brake fluid level switch with its mounting hole on the left side of the master cylinder brake fluid reservoir. Push the switch into the fluid reservoir until the switch retaining tabs (2) are expanded on the other side of the reservoir (1), locking it in place.

Fig 2: Brake Fluid Level Switch
Courtesy of DAIMLERCHRYSLER CORP.
Connect the vehicle wiring harness connector (2) to the switch.