LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Instrument Cluster (Service Information)) >> Service Information >> Removal

Service Information: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cluster Retaining Screws
GC0043622Courtesy of DAIMLERCHRYSLER CORP.
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
  3. Remove the instrument cluster bezel (Refer to BODY/INSTRUMENT PANEL/CLUSTER BEZEL - REMOVAL) .
  4. Remove four screws (1) to the instrument cluster (2).
  5. Pull straight back to expose the cluster electrical connectors.
    Fig 2: Removing/ Installing Cluster
    GC0043623Courtesy of DAIMLERCHRYSLER CORP.
  6. Disconnect the four cluster electrical connectors and remove cluster from vehicle.
    Fig 3: Removing/ Installing Cluster Connectors
    GC0043624Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals