LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Differential & Driveline) >> Shaft-Half (Front) >> Diagnosis And Testing - Half Shaft >> Shudder Or Vibration During Acceleration

Shudder Or Vibration During Acceleration

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

This problem could be a result of:

  1. A worn or damaged half shaft inner cross-groove joint.
  2. A worn intermediate shaft bearing (AWD Models).
  3. Improper wheel alignment. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE)