Specifications - 175MM FIA Front Axle
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
SPECIFICATIONS
| DESCRIPTION | SPECIFICATION |
|---|---|
| Axle Ratio | 3.07 |
| Ring Gear Diameter | 175 mm (6.9 in.) |
| Ring Gear Backlash | 0.05-0.11 mm (0.002-0.004 in.) |
| Differential Torque-to-Rotate | 190-260 N.cm (17-23 in. lbs.) |
| Pinion Housing Torque-to-Rotate | 130-260 N.cm (12-23 in. lbs.) |
| Pinion Depth Shim Size | 1.15-2.11mm (0.045-0.083 in.) Available in 0.04 mm (0.0015 in.) increments |
| Pinion Bearing Preload Spacer Size | 9.60-10.59mm (0.378-0.417 in.) Available in 0.03 mm (0.001 in.) increments |
| Differential Bearing Preload Shim Size | 1.31-2.51 mm (0.051-0.099 in.) Available in 0.04 mm (0.0015 in.) increments |
| Differential Backlash Shim Size | 1.34-2.98 mm (0.053-0.117 in.) Available in 0.04 mm (0.0015 in.) increments |
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Bolt, Axle Cover-to-Housing (M10x40) | 65 | 48 | - |
| Bolt, Axle Cover-to-Housing (M8x25) | 34 | 25 | - |
| Bolt, Axle Housing-to-Engine | 65 | 48 | - |
| Bolt, Intermediate Shaft-to-Engine | 25 | 19 | - |
| Bolt, Pinion Housing-to-Axle Housing | 34 | 25 | - |
| Nut, Pinion Flange | 475 | 350 | - |
| Plug, Axle Housing Fill | 30 | 22 | - |