LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Differential & Driveline) >> Front Axle - 175 FIA >> Fluid >> Standard Procedure - Fluid Fill

Standard Procedure - Fluid Fill

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The 175MM FIA Front Axle assembly is designed for 'fill for life' and is not manufactured with a fluid drain plug.
Fig 1: Fluid Fill Plug Location
GC0014230Courtesy of DAIMLERCHRYSLER CORP.
  1. Raise and support vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
  2. Remove axle fill plug (1).
  3. Fill axle with 600ml (0.64 qts.) of Mopar® 75W-90 Synthetic Gear Lubricant. Fluid should be within 3/16" of bottom of fill hole.
scientia non olet · About LEMON Manuals