LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Sensor-Engine Coolant Temp >> Removal >> 1.6L Engine

1.6L Engine

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Coolant Temperature Sensor
GC0021809Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE COOLANT TEMPERATURE SENSOR
  1. Disconnect negative battery cable.
  2. Disconnect positive battery cable.
  3. Remove battery.
  4. Partially drain cooling system.
  5. Disconnect engine coolant temperature sensor electrical connector.
  6. Remove engine coolant temperature sensor (1). See Fig 1.
scientia non olet · About LEMON Manuals