LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Sensor-Engine Coolant Temp >> Installation >> 1.6L Engine

1.6L Engine

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Coolant Temperature Sensor
GC0021809Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE COOLANT TEMPERATURE SENSOR
  1. Install engine coolant temperature sensor (1). See Figure. Tighten sensor to 17 N.m (150 in. lbs.).
  2. Reconnect coolant temperature sensor connector.
  3. Install battery.
  4. Connect positive battery cable.
  5. Connect negative battery cable.
  6. Fill cooling system, (Refer to COOLING/ENGINE/COOLANT - STANDARD PROCEDURE) .
scientia non olet · About LEMON Manuals