1.6L Engine

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Engine Coolant Temperature Sensor

Courtesy of DAIMLERCHRYSLER CORP.

1 - ENGINE COOLANT TEMPERATURE SENSOR

The engine coolant temperature (ECT) sensor (1) threads into the rear of the cylinder head, below the thermostat housing. New sensors have sealant applied to the threads. The ECT Sensor is a Negative Thermal Coefficient (NTC) sensor. See Fig 1.