LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Housing-Engine Coolant Thermostat And Coolant Outlet Connector >> Removal >> 1.6L Engine

1.6L Engine

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Coolant Thermostat Housing
GC0021810Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE COOLANT THERMOSTAT HOUSING
  1. Disconnect negative battery cable.
  2. Disconnect positive battery cable.
  3. Remove battery.
  4. Partially drain cooling system.
  5. Remove fasteners securing heater return tube to engine block and thermostat housing. Reposition heater tube.
  6. Disconnect upper radiator hose and heater hose from thermostat housing (1).
  7. Remove thermostat housing fasteners and remove thermostat housing (1). See Fig 1.
  8. Remove thermostat.
scientia non olet · About LEMON Manuals