Heater-Engine Block: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - BLOCK HEATER |
| 2 - SCREW |
- Thoroughly clean core hole and heater seat.
- Insert block heater (1) assembly with element loop positioned. See Fig 1.upward .
- With heater seated, tighten center screw (2) securely to assure a positive seal.
- Connect power cord to block heater.
- Lower vehicle.
- Fill the cooling system, (Refer to COOLING/ENGINE/COOLANT - STANDARD PROCEDURE) .