LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> DRAINCOCK-Radiator >> Removal

Section 68 (Engine Cooling System & Automatic Transmission Cooling System): Engine: DRAINCOCK-Radiator: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removin/Installing Draincock
GC0021816Courtesy of DAIMLERCHRYSLER CORP.
1 - RADIATOR TANK
2 - DRAINCOCK
CAUTION: Use of pliers on draincock is not recommended. Damage may occur to radiator or draincock.
NOTE: It is not necessary to remove draincock during a routine coolant drain.
  1. Drain the cooling system, (Refer to COOLING/ENGINE/COOLANT - STANDARD PROCEDURE) .
  2. Open the draincock by turning it counterclockwise until it stops.
  3. Turn the draincock back (clockwise) 1/8 turn.
  4. Pull the draincock (2) from the radiator tank. See Fig 1.