Section 68 (Engine Cooling System & Automatic Transmission Cooling System): Engine: DRAINCOCK-Radiator: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - RADIATOR TANK |
| 2 - DRAINCOCK |
- Align draincock stem to radiator tank opening.
- Push draincock into the radiator tank opening.
- Tighten the draincock by turning clockwise until it stops.
- Fill the cooling system, (Refer to COOLING/ENGINE/COOLANT - STANDARD PROCEDURE) .