LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Container-Coolant Recovery >> Removal >> 2.0/2.4L Engine >> Turbo

2.0/2.4L Engine: Turbo

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overflow Hose Routing - 2.4L Turbo
GC0021843Courtesy of DAIMLERCHRYSLER CORP.
1 - OVERFLOW HOSE
2 - COOLANT OUTLET CONNECTOR
  1. Disconnect overflow hose (1) from coolant outlet connector. See Fig 1.
  2. Raise vehicle on hoist.
  3. Remove lower screw securing coolant recovery container to dash panel.
  4. Lower vehicle.
  5. Remove throttle cable shield from throttle body.
  6. Disconnect throttle and speed control cables from throttle body. Reposition cables.
    Fig 2: Coolant Recovery Container - 2.4L Turbo
    GC0021842Courtesy of DAIMLERCHRYSLER CORP.
    1 - NUT
    2 - SCREW
    3 - COOLANT RECOVERY CONTAINER
  7. Remove nut securing coolant recovery container (3) to dash panel. See Fig 2.
  8. Remove coolant recovery container.
scientia non olet · About LEMON Manuals