LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Cooling System & Automatic Transmission Cooling System) >> Belt-Accessory Drive >> TENSIONER-Accessory Drive Belt >> Removal >> 2.0L/2.4L Engine

2.0L/2.4L Engine

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Automatic Belt Tensioner - 2.0L/2.4L
GC0021795Courtesy of DAIMLERCHRYSLER CORP.
1 - TORQUE STRUT BRACKET
2 - BOLT
3 - AUTOMATIC BELT TENSIONER ASSEMBLY
  1. Remove power steering/air conditioning compressor belt, (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
  2. Remove tensioner mounting bolt (2) and remove tensioner assembly (3). See Fig 1.
  3. Remove tensioner pulley, if replacing the pulley.
scientia non olet · About LEMON Manuals