LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Cooling System & Automatic Transmission Cooling System) >> Belt-Accessory Drive >> Removal >> 2.0/2.4L Engine >> Generator Belt

Generator Belt

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ADJUSTING GENERATOR BELT
GC0021793Courtesy of DAIMLERCHRYSLER CORP.
1 - ADJUSTING BOLT
2 - LOCKING NUT
3 - PIVOT BOLT
  1. Remove power steering pump/air conditioning compressor drive belt.
  2. Loosen pivot bolt (3), then locking nut (2) and adjusting bolt (1). See Fig 1.
  3. Remove generator belt.
scientia non olet · About LEMON Manuals