LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Cooling System & Automatic Transmission Cooling System) >> Belt-Accessory Drive >> Removal >> 1.6L SOHC Engine

1.6L SOHC Engine

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ACCESSORY DRIVE BELT WITHOUT A/C - 1.6L
GC0021785Courtesy of DAIMLERCHRYSLER CORP.
1 - ACCESSORY DRIVE BELT TENSIONER
2 - ACCESSORY DRIVE BELT
  1. Disconnect negative battery cable.
  2. Insert a 1/2" drive breaker bar into the square opening of the accessory drive belt tensioner (1).
    Fig 2: ACCESSORY DRIVE BELT WITH A/C - 1.6L
    GC0021786Courtesy of DAIMLERCHRYSLER CORP.
    1 - ACCESSORY DRIVE BELT TENSIONER
    2 - ACCESSORY DRIVE BELT
    3 - IDLER PULLEY
  3. Rotate accessory drive belt tensioner (1) counterclockwise until accessory drive belt (2) can be removed from pulleys. Remove accessory drive belt (2).