Section 67 (Wiring Diagram Information): Diode: Removal
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - CURRENT FLOW |
| 2 - BAND AROUND DIODE INDICATES CURRENT FLOW |
| 3 - DIODE AS SHOWN IN THE DIAGRAMS |
- Disconnect the battery.
- Locate the diode in the harness, and remove the protective covering.
- Remove the diode from the harness, pay attention to the current flow direction (1) (2) (3).