LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (DTCS B1B7F To B210D) >> Diagnosis And Testing >> B2101-Ignition Run/Start Input Circuit Low >> Monitor Conditions

Monitor Conditions

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. When Monitored: 

    While the CAN bus is RUN or signal not available and the IOD status is "IN". The module checks the (F201) Fused Ignition Switch Output (Run-Start) circuit voltage input range.

scientia non olet · About LEMON Manuals