LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (HVAC System (Service Information)) >> Distribution >> Duct-Floor Console >> Removal

Duct-Floor Console: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remove/Install Floor Console Duct
GC0013946Courtesy of DAIMLERCHRYSLER CORP.
NOTE: LHD model shown. RHD model similar.
  1. Remove the center floor console (Refer to REMOVAL ).
  2. Remove the two screws (1) that secure the floor console duct (2) to the center floor panel (3).
  3. Disconnect the floor console duct from the floor distribution duct (4) and remove the floor console duct from the vehicle.
scientia non olet · About LEMON Manuals