LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (HVAC System (Service Information)) >> Distribution >> Duct-Floor Console >> Installation

Duct-Floor Console: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remove/Install Floor Console Duct
GC0013946Courtesy of DAIMLERCHRYSLER CORP.
NOTE: LHD model shown. RHD model similar.
  1. Position the floor console duct (2) into the vehicle.
  2. Connect the floor console duct to the floor distribution duct (4).
  3. Install the two screws (1) that secure the floor console duct to the center floor panel (3). Tighten the screws to 2.2 N.m (20 in. lbs.).
  4. Install the center floor console (Refer to INSTALLATION ).
scientia non olet · About LEMON Manuals