LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (HVAC System (Service Information)) >> Controls >> Relay-A/C Clutch >> Installation

Relay-A/C Clutch: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Relay-A/C Clutch
GC0013934Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the A/C clutch relay (2) into the receptacle of the integrated power module (IPM) (1).
  2. Align the A/C clutch relay terminals with the terminal cavities in the IPM receptacle and push down firmly on the relay until the terminals are fully seated.
  3. Close the cover of the IPM.
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals