LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Overhead Console (Service Information)) >> Sensor-Ambient Air Temperature >> Installation

Sensor-Ambient Air Temperature: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ambient Temperature Sensor Fastener
GC0016234Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the ambient temperature sensor in the vehicle.
  2. Install the fastener that secures the ambient temperature sensor to the front fascia.
    Fig 2: Ambient Temperature Sensor Connector
    GC0016233Courtesy of DAIMLERCHRYSLER CORP.
  3. Connect the wire harness connector (1) to the ambient temperature sensor (2).
  4. Install the belly pan, (Refer to BODY/EXTERIOR/BELLY PAN - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals