Section 40 (Audio System (Service Information)): Amplifier: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electrical Harness Connectors

Courtesy of DAIMLERCHRYSLER CORP.

NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .

Disconnect and isolate battery negative cable.
Remove the instrument panel silencer.
Disconnect electrical harness connectors.

Fig 2: Amplifier
Courtesy of DAIMLERCHRYSLER CORP.
Remove the mounting fasteners (1).
Remove the amplifier (2).