LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Audio System (Service Information)) >> Amplifier >> Installation

Section 40 (Audio System (Service Information)): Amplifier: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Amplifier
GC0015550Courtesy of DAIMLERCHRYSLER CORP.
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .
  1. Position amplifier (2) into place.
  2. Install mounting fasteners (1).
    Fig 2: Electrical Harness Connectors
    GC0015551Courtesy of DAIMLERCHRYSLER CORP.
  3. Connect electrical harness connectors.
  4. Install instrument panel silencer.
  5. Connect battery negative cable.
scientia non olet · About LEMON Manuals