LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Steering System (Service Information)) >> Column >> Coupling-Steering >> Removal

Section 38 (Steering System (Service Information)): Column: Coupling-Steering: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully extend or pull out adjustable steering column.
  2. Center the steering wheel and lock the steering wheel with a steering wheel holder.
  3. Raise and support vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
    Fig 1: Shaft Retaining Nuts
    GC0013221Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the pinch bolt (4) connecting the steering shaft (3) to the lower steering coupling shaft (5).
  5. Separate the lower coupling (5) from the steering shaft (3).
    Fig 2: Steering Coupling
    GC0013230Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the pinch bolt (1) from the steering coupling (2) at the steering gear (3).
  7. Carefully slide the coupling (2) from the steering gear (3).
  8. Remove the steering coupling (2) from the vehicle.
scientia non olet · About LEMON Manuals