LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Chime & Buzzer (Service Information)) >> Park Assist Sensor >> Removal

Park Assist Sensor: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remove/Install Park Assist Sensor
GC0015719Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove rear fascia (Refer to FRAME & BUMPERS/BUMPERS/REAR FASCIA - REMOVAL) .
  3. Unsnap Park Assist Sensor from the retaining housing and remove from fascia.
scientia non olet · About LEMON Manuals