LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Chime & Buzzer (Service Information)) >> Park Assist Module >> Installation

Park Assist Module: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting/Connecting Park Assist Module Electrical Connector
GC0015716Courtesy of DAIMLERCHRYSLER CORP.
  1. Connect the Park Assist Module electrical connector.
    Fig 2: Remove/Install Park Assist Module
    GC0015714Courtesy of DAIMLERCHRYSLER CORP.
  2. Position the Park Assist Module (2) and install the two attaching screws (1). Torque screws to 3.5 N.m (30 in. lbs.).
  3. Reposition the trunk carpet.
  4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals