LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Powertrain Control Module (Pcm) - Electrical Diagnostics - 42RLE Automatic Transmission) >> DTC Troubleshooting >> P0602-Control Module Programming Error/Not Programmed >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. CONTROL MODULE PROGRAMMING ERROR 
    NOTE: Controller is programmed with generic software and will not allow the correct vehicle Powertrain management.
    1. Record the controller part number.
    2. Update the controller with the correct software in accordance with the Service Information.

      Verify that the controller updated successfully.