LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Instrument Cluster (Service Information)) >> Service Information >> Removal

Service Information: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Cluster Bezel
GC0016049Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
  2. Remove the instrument cluster bezel (Refer to BODY/INSTRUMENT PANEL/CLUSTER BEZEL - REMOVAL) .
  3. Remove the four cluster retaining screws.
  4. Disconnect the cluster electrical connectors.
  5. Remove cluster from instrument panel.
scientia non olet · About LEMON Manuals