LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Instrument Cluster (Service Information)) >> Instrument Panel Switch Pod >> Installation

Instrument Panel Switch Pod: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Screws
GC0016054Courtesy of DAIMLERCHRYSLER CORP.
  1. Place the switch pod in the bezel opening and install the two screws (1).
  2. Install the instrument panel center bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .
  3. Connect the battery negative cable.
scientia non olet · About LEMON Manuals