Diagnostic Test
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- ACTIVE DTC NOTE: For vehicle communication problems, use the scan tool to refer to the network review screen. This screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.
- Ignition on, engine not running.
- With a scan tool, read DTCs.
Is the status Active for this DTC?
Yes
- Refer to DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Diagnosis and Testing and perform the U0001-CAN C Bus diagnostic procedure.
No
- The conditions that set this DTC are no longer present.