LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Restraints System (Service Information)) >> Seat Belt And Retractor >> Removal >> Rear - Sedan

Rear - Sedan

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Belt Anchor
GC0016664Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the lower seat belt anchor (2) bolt (3).
    Fig 2: C-Pillar Trim Panel
    GC0016666Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove the upper C-pillar trim panel (Refer to BODY/INTERIOR/C-PILLAR TRIM - REMOVAL) .
    Fig 3: Bolt
    GC0016665Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the one upper turning loop retaining bolt (2).
    Fig 4: Bolt
    GC0016665Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the one seat belt retractor (4) mounting bolt (3).
  5. Pull retractor inboard and drop down to release tabs from slots.
scientia non olet · About LEMON Manuals