LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 339 (Anti-Lock Brake System - Electrical Diagnostics) >> DTC Troubleshooting >> C123A-Esp System Sensors Calibration >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INITIALIZE ANTI-LOCK BRAKES MODULE 
    1. Initialize Anti-Lock Brake Module, refer to ABS VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Antilock Brake (ABS) - Standard Procedure .

      Does this DTC reset?

      Yes 

      No 

      • Test complete.