Diagnostic Test
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- VERIFY DTC IS ACTIVE NOTE: Ensure the IOD fuse is installed and battery Voltage is between 10 and 16 Volts before proceeding.
- Ignition on, engine not running.
- Using a scan tool, read ACC DTCs.
Is the DTC active at this time?
Yes
- Perform the appropriate diagnostic procedure. Refer to DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Diagnosis and Testing . .
No
- Perform the Stored Lost Communication DTCs diagnostic test procedure. Refer to Non-DTC Diagnostics/Communication - Diagnosis and Testing