Set Conditions

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Set Condition:
Normally when an active Diagnostic Trouble Code (DTC) is set in the Powertrain Control Module (PCM). May also set if engine is operated at RPM limit (e.g. driver performing wide open throttle [WOT] maneuvers). The ACC module will disable the ACC system and the ACC UNAVAILABLE message will display in the Cabin Compartment Node (CCN). Once the DTC changes from active to stored, the ACC system will return to normal operation. This DTC will clear after the ACC Module sees 100 consecutive key cycles with the DTC stored.