LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Cruise Control System - Active Cruise Control Module (Acc) - Electrical Diagnostics) >> DTC Troubleshooting >> C2206-Vehicle Configuration Mismatch >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. ACC MODULE CHANGED 
    NOTE:
    • Diagnose and repair all Totally Integrated Power Module (TIPM) DTCs before continuing.
    • If the ACC module was swapped with a module from a different vehicle, this DTC will set. Once the module is configured to the vehicle it cannot be moved to a different one.

    Was the ACC Module replaced with one from another vehicle?

    Yes 

    • Return the original ACC Module to the vehicle and proceed with testing. The Alignment Procedure will need to be performed.

    No