Diagnostic Test
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- TPM INTERNAL FAILURE DTC PRESENT
- Turn the ignition on.
- With the scan tool, read DTCs.
- With the scan tool, erase DTCs.
- Turn the ignition off.
- Turn the ignition on.
- With the scan tool, read DTCs.
Does the scan tool display TIRE PRESSURE MODULE INTERNAL FAILURE?
Yes
- Replace the Tire Pressure Monitoring (TPM) Module in accordance with the Service Information. Refer to Tires and Wheels/Tire Pressure Monitoring/MODULE, Tire Pressure Monitoring (TPM) - Removal .
- Perform the TPM VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Tire Pressure (TPM) - Standard Procedure .
No
- The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
- Perform the TPM VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Tire Pressure (TPM) - Standard Procedure .