LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 ((Transmission Control Module (TCM) - Electrical Diagnostics - Nag1 Automatic Transmission)) >> DTC Troubleshooting >> P2767-Input Speed Sensor 2 Circuit No Signal >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

The Input Speed Sensor 2 (N3) is one of two hall effect speed sensors that are used by the Transmission Control Module (TCM) to calculate the transmissions turbine speed. Since the turbine speed could not be measured directly, two of the drive elements are measured. Two input speed sensors are required because both elements are not active in all gears.

scientia non olet · About LEMON Manuals