Brake Rotor

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When refacing a rotor, the required TIR (Total Indicator Reading) and thickness variation limits MUST BE MAINTAINED. Extreme care in the operation of rotor turning (machining) equipment is required.

LIMITS/SPECIFICATIONS - 17 INCH BRAKES (BASE)

Brake Rotor	Rotor Thickness	Minimum Rotor Thickness	Rotor Thickness Variation	Rotor Runout *
Front	27.87-28.13 mm	26.5 mm	0.010 mm	0.035 mm
Front	1.097-1.107 in.	1.040 in.	0.0004 in.	0.0014 in.
Rear	9.87-10.13 mm	8.5 mm	0.010 mm	0.035 mm
Rear	0.389-0.399 in.	0.335 in.	0.0004 in.	0.0014 in.
* TIR Total Indicator Reading (Measured On Vehicle)

LIMITS/SPECIFICATIONS - 18 INCH BRAKES (PREMIUM)

Brake Rotor	Rotor Thickness	Minimum Rotor Thickness	Rotor Thickness Variation	Rotor Runout *
Front	27.87-28.13 mm	26.5 mm	0.010 mm	0.035 mm
Front	1.097-1.107 in.	1.040 in.	0.0004 in.	0.0014 in.
Rear	21.87-22.13 mm	20.5 mm	0.010 mm	0.035 mm
Rear	0.861-0.871 in.	0.807 in.	0.0004 in.	0.0014 in.
* TIR Total Indicator Reading (Measured On Vehicle)

LIMITS/SPECIFICATIONS - SRT8 BRAKES

Brake Rotor	Rotor Thickness	Minimum Rotor Thickness	Rotor Thickness Variation	Rotor Runout *
Front	31.90-32.10 mm	30.00 mm	0.040 mm	0.030 mm
Front	1.256-1.264 in.	1.181 in.	0.0016 in.	0.0012 in.
Rear	27.90-28.10 mm	26.00 mm	0.040 mm	0.030 mm
Rear	1.098-1.106 in.	1.024 in.	0.0016 in.	0.0012 in.
* TIR Total Indicator Reading (Measured On Vehicle)

LIMITS/SPECIFICATIONS - POLICE PACKAGE BRAKES

Brake Rotor	Rotor Thickness	Minimum Rotor Thickness	Rotor Thickness Variation	Rotor Runout *
Front	27.87-28.13 mm	26.5 mm	0.010 mm	0.035 mm
Front	1.097-1.107 in.	1.040 in.	0.0004 in.	0.0014 in.
Rear	25.87-26.13 mm	24.5 mm	0.008 mm	0.025 mm
Rear	1.019-1.029 in.	0.965 in.	0.0003 in.	0.0010 in.
* TIR Total Indicator Reading (Measured On Vehicle)