Rear Suspension

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: REAR SUSPENSION

Courtesy of CHRYSLER LLC

This vehicle utilizes a five-link rear suspension including the following major components:

Camber Link (1)
Compression Link (5)
Spring Link (2)
Tension Link (6)
Toe Link (3)
Coil Spring
Crossmember
Hub And Bearing
Knuckle (4)
Shock Absorber
Stabilizer Bar

Service Procedures for the crossmember can be found in Frame And Bumpers. Refer to Frame and Bumpers/Frame/CROSSMEMBER - Removal