LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Tires & Wheels (Service Information)) >> Tire Pressure Monitoring >> MODULE, Tire Pressure Monitoring (TPM) >> Removal >> Removal

MODULE, Tire Pressure Monitoring (TPM): Removal: Removal

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Transponder Mounting
GC0080583Courtesy of CHRYSLER LLC
  1. Remove wheelhouse splash shield. Refer to Body/Exterior/SHIELD, Splash - Removal .
  2. Disconnect wiring harness connector (3) at the Tire Pressure Module (2).
  3. Remove mounting nuts (1), then remove the Tire Pressure Module (2) from body seam flange (4).
scientia non olet · About LEMON Manuals