Front Suspension Fastener Torque
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
FRONT SUSPENSION FASTENER TORQUE
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Engine Cradle Mounting Bolts | 185 | 136 | - |
| Hub And Bearing Mounting Bolts | 68 | 50 | - |
| Hub Nut - AWD | 213 | 157 | - |
| Hub Nut - RWD | 250 | 184 | - |
| Knuckle Dust Shield Screws | 10 | 7 | 89 |
| Lower Control Arm Cradle Nut | 176 | 130 | - |
| Lower Control Arm Ball Joint Nut - AWD | 68 + 90° TURN | 50 + 90° TURN | - |
| Lower Control Arm Ball Joint Nut - RWD | 68 + 90° TURN | 50 + 90° TURN | - |
| Tension Strut Cradle Nut | 176 | 130 | - |
| Tension Strut Ball Joint Nut | 68 + 90° TURN | 50 + 90° TURN | - |
| Shock Absorber Clevis Bracket Lower Bolt - AWD | 174 | 128 | - |
| Shock Absorber Clevis Bracket Pinch Bolt - AWD | 61 | 45 | - |
| Shock Absorber Lower Mounting Bolt - RWD | 174 | 128 | - |
| Shock Absorber Upper Mounting Nuts | 27 | 20 | 239 |
| Shock Absorber Shaft Nut | 95 | 70 | - |
| Stabilizer Bar Link Upper (Shock) Nut | 128 | 95 | - |
| Stabilizer Bar Link Lower Nut | 128 | 95 | - |
| Stabilizer Bar Isolator Retainer Bolts | 60 | 44 | - |
| Stabilizer Bar Heat Shield Screws | 7 | 5 | 62 |
| Upper Control Arm Ball Joint Nut | 47 + 90° TURN | 35 + 90° TURN | - |
| Upper Control Arm Body Nuts | 75 | 55 | - |
| Outer Tie Rod Ball Joint Nut | 85 | 63 | - |
| Tie Rod Jam Nut | 75 | 55 | - |