STABILIZER BAR, Front: Removal: All-Wheel-Drive

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Link Ball Joint At Stabilizer Bar

Courtesy of CHRYSLER LLC

Raise and support vehicle. Refer to Vehicle Quick Reference/Hoisting - Standard Procedure .
Remove belly pan. Refer to Frame and Bumpers/Under Body Protection/BELLY PAN - Removal .
On each side of vehicle, remove nut (5) fastening stabilizer link (3) to stabilizer bar (4). Slide link ball joint stem (1) from bar.

Fig 2: Stabilizer Bar Bushing And Retainer
Courtesy of CHRYSLER LLC
On each side of vehicle, remove bolts (2) fastening stabilizer bar isolator retainer (3) in place.
Remove stabilizer bar with isolators and retainers from vehicle.
On each side of bar, remove retainers (3) from around stabilizer bar isolators (1).
Utilizing slit, remove each isolator (1) from stabilizer bar (2).