Hub And Bearing: Removal: RWD
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle. Refer to Vehicle Quick Reference/Hoisting - Standard Procedure
- Remove wheel mounting nuts (3), then tire and wheel assembly (1).
- Access and remove front brake rotor. Refer to Brakes/Hydraulic/Mechanical/ROTOR, Brake - Removal
- Remove dust cap (2). When doing this, avoid damaging internal bore of hub to preserve seal integrity.
- Remove hub nut (1).
- Slide hub and bearing off knuckle spindle.