Left Axle Seal
WARNING: This page is about a different car, the 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Using Installer L-4507, install left (inboard) axle seal (2).
- Install differential (3) . Install cover (5) with new o-ring seal (4).
- Install and torque cover-to-housing bolts to:
- M10x40 - 65 N.m (48 ft. lbs.)
- M8x25 - 34 N.m (25 ft. lbs.)
- Install axle assembly into vehicle. See Differential and Driveline/Front Axle - Installation
- Fill axle (1) with 600ml (0.64 qts.) Mopar® 75W-90 Synthetic Gear Lubricant. Torque fill plug (1) to 30 N.m (22 ft. lbs.)