LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (3.5L Engine (Service Information)) >> Valve Timing >> TENSIONER, Engine Timing >> Removal >> TENSIONER Pulley Assembly

TENSIONER Pulley Assembly

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: TENSIONER PULLEY
GC0095562Courtesy of CHRYSLER LLC
1 - TENSIONER PULLEY
2 - PIVOT BOLT
3 - TENSIONER BRACKET
  1. Remove the timing belt. See Engine/Valve Timing/BELT and SPROCKETS, Timing - Removal .
  2. Remove the timing belt tensioner pulley (1) and bracket (3) assembly by unscrewing the pivot bolt (2) from the oil pump housing.
scientia non olet · About LEMON Manuals