Torque - 3.5L
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Camshaft Sprocket Bolt - Right Side | 102 +1/4 Turn | 75 +1/4 Turn | - |
| Camshaft Sprocket Bolt - Left Side | 102 +1/4 Turn | 75 +1/4 Turn | - |
| Camshaft Thrust Plate - Bolts | 28 | - | 250 |
| Connecting Rod Cap - Bolts | 27 +1/4 Turn | 20 +1/4 Turn | - |
| Crankshaft Main Bearing Cap Inner Main Cap Bolts |
20 +1/4 Turn | 15 +1/4 Turn | - |
| Crankshaft Main Bearing Cap Outer Main Cap Bolts |
27 +1/4 Turn | 20 +1/4 Turn | - |
| Tie Bolts (Horizontal) | 28 | - | 250 |
| Crankshaft Damper - Bolt | 95 | 70 | - |
| Cylinder Head Bolts* -Step 1 |
61 | 45 | - |
| Cylinder Head Bolts* -Step 2 |
88 | 65 | - |
| Cylinder Head Bolts* -Step 3 |
88 | 65 | - |
| Cylinder Head Bolts* -Step 4 |
+1/4 Turn | +1/4 Turn | - |
| *Refer to procedure for tightening sequence. See Engine/Cylinder Head - Installation | |||
| Cylinder Head Cover - Bolts | 12 | - | 105 |
| Exhaust Manifold to Cylinder Head - Bolts | 23 | - | 200 |
| Exhaust Manifold Heat Shield - Bolts | 12 | - | 105 |
| Flex plate to Crankshaft | 95 | 70 | - |
| Flex plate to Torque Converter | 75 | 55 | - |
| Intake Manifold - Lower | 28 | - | 250 |
| Intake Manifold - Upper | 12 | - | 105 |
| Oil Pan -M6 Bolts |
12 | - | 105 |
| Oil Pan -M8 Bolts |
28 | - | 250 |
| Oil Pan to Transmission Bell Housing | 55 | 40 | - |
| Flex Plate Inspection Cover | 11 | - | 97 |
| Oil Pan Drain Plug | 27 | 20 | - |
| Oil Cooler Connector Bolt | 61 | 45 | - |
| Oil Filter | 12 | - | 102 |
| Oil Pump to Block - Bolts | 28 | - | 250 |
| Oil Pump Cover - Bolts | 12 | - | 105 |
| Oil Pump Pick Up Tube - Bolt | 28 | - | 250 |
| Crankshaft Rear Seal Retainer | 12 | - | 105 |
| Engine Mount to Mounting Bracket | 75 | 55 | - |
| Engine Mount to Cradle - Nuts | 75 | 55 | - |
| Engine Mount Heat Shield | 11 | - | 97 |
| Engine Mount Through Studs | 12 | - | 106 |
| Rocker Shaft Pedestal Retaining - Bolts | 31 | - | 275 |
| Spark Plugs | 28 | 20 | - |
| Timing Belt Tensioner-Bolts | 28 | - | 250 |
| Timing Belt Tensioner Pulley Assembly - Bolt | 61 | 45 | - |
| Timing Belt Cover -M6 Bolts |
12 | - | 105 |
| Timing Belt Cover -M8 Bolts |
28 | - | 250 |
| Timing Belt Cover -M10 Bolts |
54 | 40 | - |