LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (3.5L Engine (Service Information)) >> Cylinder Head >> VALVES, Intake and Exhaust >> Standard Procedure >> Valve And Valve Seat Refacing >> Valves

Valve And Valve Seat Refacing: Valves

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Intake and Exhaust Valves
GC0095508Courtesy of CHRYSLER LLC
1 - MARGIN
2 - FACE
3 - STEM
4 - VALVE SPRING RETAINER LOCK GROOVES
  1. Inspect the remaining margin (1) after the valves are refaced. See Engine - Specifications .
scientia non olet · About LEMON Manuals