Section 318 (42RLE Automatic Transmission (Service Information)): Specifications: Torque
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Bolt, Torque Converter Housing to Engine | 68 | 50 | - |
| Bolt, Converter-to-Driveplate | 88 | 65 | - |
| Bolt, Fluid Filter-to-Valve Body | 5 | - | 45 |
| Bolt, L/R Piston Retainer-to-Case | 5 | - | 45 |
| Bolt, Adapter/Extension Housing | 54 | 40 | - |
| Bolt, Manual Valve Lever-to-Manual Valve | 5 | - | 45 |
| Bolt, Oil Pan-to-Case | 20 | 14.5 | - |
| Bolt, Oil Pump-to-Case | 30 | - | 265 |
| Bolt, Park Sprag Retainer | 4.5 | - | 40 |
| Bolt, Reaction Shaft Support Halves | 28 | - | 250 |
| Bolt, Solenoid/Pressure Switch Assembly-to-Valve Body | 5.5 | - | 50 |
| Bolt, Torque Converter Access Cover | 11 | 8 | - |
| Bolt, Transmission to Engine Oil Pan | 39 | 29 | - |
| Bolt, Valve Body-to-Case | 12 | - | 105 |
| Bolt, Valve Body-to-Transfer Plate | 5 | - | 45 |
| Fitting, Cooler Line | 47.5 | 35 | - |
| Nut, Output Shaft | 200 | 147 | - |
| Plug, Pressure Tap | 5 | - | 45 |
| Bolt, Input Speed-to-Case Sensor | 9 | - | 80 |
| Bolt, Output Speed-to-Case Sensor | 9 | - | 80 |
| Nut, Transfer Case | 47 | 35 | - |
| Bolt, Crossmember to Frame | 68 | 50 | - |
| Bolt, Rear Support to Transmission | 47 | 35 | - |
| Bolt, Clevis Bracket to Crossmember | 47 | 35 | - |
| Bolt, Clevis Bracket to Transmission | 68 | 50 | - |
| Screw, TRS/Manual Shaft Retaining | 5 | - | 45 |
| Screw, 2/4 Accumulator Retainer Plate | 5 | - | 45 |